Pages

Thursday, February 12, 2015

Heart You Mini Quilt - Tutorial


Heart You Mini Quilt Tutorial

Lets just start by saying I love Liberty London fabrics!  I have been collecting them for a while and just adore working with them.  So when you are lucky enough to put together a Tutorial for the Liberty London Blog - life pretty much is ever so sweet.

You can check out my Tutorial and Interview here!

Deciding which idea to go with from those I had put together was hard.  I wanted a project that would look striking, wouldn't require yardage for those who are starting to collect or for those who already have lots of Liberty fabric - a great project that could showcase some of their favourites.

I don't believe there is such a thing as Liberty scraps - rather Liberty treasures and this project is just perfect for those smaller pieces, smaller prints and even some fussy cutting if you like.


Finished Size – 20in x 20in (51cm x 51cm)

¼ inch seam allowance included
Read all instructions before starting
Fabric measurements based on fabric 42in/110cm wide (WOF)


REQUIREMENTS
6.5in x 6.5in of 18 different Liberty Prints
16in  (40cm) white fabric
6in binding fabric
26in x 26in  (60cm x 60cm) Batting
26in x 26in Backing fabric
Cotton sewing thread
Pencil
Hand quilting embroidery cotton (I have used Aurifil 12t)
Rotary Cutter, ruler and mat
General sewing supplies
Sewing machine with ¼ inch and walking foot

For sewing the Mini Quilt I used Aurifil 50wt #2024 - This is a great white thread.  This was also used for the quilting lines on the top of the quilt.  For the Backstitch I used Aurifil 12wt #2530.  I love this shade of hot pink.

Cutting Instructions

From the White
Cut 8 –1.5in strips x WOF.  Cross cut into 224 – 1.5in x 1.5in squares
Cut 1 – 2.25in strip x WOF.  Cross cut into 16 – 2.25in x 2.25in squares

From each of the 18 Liberty fabrics
Cut 8 – 1.5in squares.  You need 144 squares in total
Cut 1 – 2.25in square.  You only need 16 in total.

Binding
Cut 2 – 2.25in strips x WOF

Step 1 - Cut out as per cutting instructions.

Step 2 -To make the Half Square Triangles (HST) – take the 2.25in white squares and with a pencil mark a diagonal line from one corner to the other.  Place one Liberty 2.25in square with right sides facing a white 2.25in square.  Pin together.  Sew ¼ in, along either side of this marked line on your white square.



If you mark and pin them all up you can chain piece these to speed up this step.  You will have 2 Liberty Squares left over, as you only need 16.


      Cut along the diagonal line and press the seam toward to coloured fabric. 


Trim these HST to be 1.5in squares.  Repeat until you have made 32 HST’s in total.


Step 3 - Lay out your white squares and Liberty prints in the Heart pattern (following the diagram) so that you make 20 columns by 20 rows.  Play with the placement of the Liberty fabrics to create a pleasing look to your mini quilt top so that you do not have too many of the same fabrics or colours together.  The HST blocks will form the shape/sides of your Heart.

    Note: Diagram above is to scale - 1 square = 1.5in unfinished square

Step 4 Sew up the squares and HST by sewing each of the 20 squares together the make a row.




Step 5 Press the seams in the same direction.  Continue sewing each of the rows together pressing alternate rows in the same direction.



As you have pressed the rows in opposite directions the seams will “nest” when you sew the rows together.  This will make it easy to pin the squares in place. 
     
Step 6 Once you have sewn all of the rows, sew them together to complete your mini quilt top.



Step 7 - Draw the word "love" onto the mini quilt top with a pencil.  Using Backstitch - sew the lettering using your hand embroidery thread onto the mini quilt top.



Step 8 - Sandwich your Mini Quilt
Lay your backing fabric right side down, then centre the wadding and lay the quilt top right side up over the top.  Smooth out the quilt top and pin the three layers together.

Step 9 - Quilting
I machined quilted the quilt in the ditch around the heart.  I used a white cotton thread to sew the lines and then I echoed the shape of the heart out from the centre to make a heart shape with my quilting lines.


Step 10 - Binding
Take the binding strips and join them with right sides facing.


Mark the diagonal and sew along this line.  Trim and press the seam open. 



Then press the entire strip in half length ways with wrong sides facing. 


Start about half of the way along one side of the mini quilt sew the binding strip to the right side of the mini quilt, mitring the corners as you go. 

Stop about 6 inches from where you started.  Join the ends and cut off excess.  Continue sewing the binding to the min quilt top.  Trim the backing and wadding.



Fold over the binding and slip stitch into place along the back seam line.





I would love to see your Heart You Mini Quilts.  You can send pictures to me at 
tiedwitharibbon@gmail.com

Or you can link them over on Instagram with the #heartyouminiquilt

Or you can even send me a message on Facebook or post them on my wall.

Happy Sewing and I can't wait to see all your stunning Heart You Mini Quilts

Jemima x x

3 comments:

  1. I love this very sweet mini heart tutorial. I will get started on making one as soon as I gather my supplies. Thank you for this chance to win these wonderful products.

    ReplyDelete
  2. Do you usually attach your binding before trimming the batting and backing? I've never seen tit done this way before.

    ReplyDelete
  3. Hi Karen, yes I have always done it that way and was taught that way to do it. You can do it either way - the result is the same.

    ReplyDelete

Note: Only a member of this blog may post a comment.